Water is referred to as life to mankind. Everyone prioritizes having access to clean water above all other needs. Nobody could live without water. For both drinking and performing daily home chores humans require clean water to survive. For households who wish to make sure that their drinking water is free of pollutants and impurities sink water filters are popular options. But the most important thing is routine maintenance and checking whether the filtration process properly works or not.
Want to know how to maintain and replace under sink water filter cartridges? Then this blog is just for you. Here we will give you how to maintain the filter and what steps one should follow while replacing the cartridges. So stay with us to know about them.
How to Take Care of the Water Filter under the Sink –
Just like other appliances and small kitchen gadgets water filters do need to take timely maintenance. Such kind of filtration process consists of water softeners and a filtration system that offers clean and fresh water. But it too needs timely check-ups and even replacement. Otherwise, we may have unhealthy water that we do not catch with bare eyes. Just follow the below-mentioned ways and we hope that you can take better care of under sink water purification system.
Water Softener Maintenance
This is one of the major components of an under-sink water filter system. There are branded softeners that can be easily found around the market. If you choose the best one then it will last for decades. But one thing we must remember is that it needs timely maintenance that will extend the life cycle. First of all, check thoroughly the water softener every month and always keep the brine tank full to the half potion. It is absolutely essential to choose the right salt. Must use a suitable cleanser or water softener at least once in four months.
Water Filtration System Maintenance
Whether it is under the sink or standing water filtration system without an appropriate filtration mechanism we cannot expect clean and fresh water. This system usually lasts for up to six months but it is completely depending on the quality of the water and the volume used per day. There is an advanced filtration unit that includes a reverse osmosis process where the semipermeable membrane is present. This membrane filters out the microparticles and offers clean drinking water. This will last up to two to three years but of course, depends on the water quality.
How to Replace an Under-Sink Water Filter Cartridge: A Step-by-Step Guide –
Below we have listed the steps of replacing the filter cartridge. Let us go through them.
Gather All the Tools
First of all must gather all the required tools that are essential while replacing the cartridge. There are many incidents that can be experienced during this task. While searching exact tools people used to have bumps on their heads for several times. Therefore must gather tools near you and ask someone to stay there for help.
Turn Off the Water Supply
Before starting the replacement or dismantling the parts it is highly recommended to turn off the switch of the water connection. Otherwise, it will become a mess when you start the task and suddenly water comes out from several places. Fortunately, some under sink water filter in Singapore has small valve situated on the internal water line. But if you do not have such an option then must turn off the switch.
Loosen Filter Cartridge Housing
Hold a wrench and loosen the filter cartridge housing by yourself. This work can be done also by hand. You need to carefully take off the housing by keeping it upright because it contains water. After that remove the housing with care and continue the rest of the processes.
Change the O Rings
The O rings should be replaced during the replacement of cartridges but some manufacturers will offer to change it annually. Therefore if you feel confused then you can contact the manufacturer and ask about it and then proceed with the entire task. Otherwise, it should be removed and the new ring will be installed. Must ensure that it is sealed properly otherwise water can be leaked. Be careful not to leave the bottom O ring inside the filter housing when you remove each one.
Go Through the Old Filters
You can check the old filters to ensure that it is the right time to discard them or not. Then clean the housing with soap and water and scrub with a brush if needed. While doing this must clean the caps with cold water.
Link the Housing Pumps
After cleaning the housing caps and checking the filters connect the housing pump back with properly attaching the caps. Then open the shutoff valve and then fill the excess water to the housing.
Test the Faucet
Finally, it is time to check the faucet if it properly works. Then let the water come in contact for at least 30 minutes with the housings and faucet. Then you can shut off the valve and remove the housing.
Few Last Words
We hope that after going through the entire discussion everyone has a good understanding of the under-sink water filter cartridge replacement procedure and how to maintain it. Your under-sink water filter will continue to give you clean and fresh-tasting water for many years to come if you give it the necessary care and replace the filter on a regular basis.
Also Check: The Value of a Home Water Filtration System
